CG-60AR
Mimaki CG-60AR
CG-60AR Roll-to-roll and
sheet-fed cutting plotter
The new CG-60AR cutting plotter builds on the strong heritage of its predecessor and comes with intuitive new features and optimized specifications. With the unique ID-Cut function, increased pressure and improved precision, it delivers reliable and precise cutting when working flawlessly with Mimaki printers.
MULTIFUNCTIONAL CUTTING PLOTTER WITH MAXIMUM VERSATILITY
The CG-AR series of cutting plotters has the highest cutting pressure in the segment for the use of a wider range of materials and offers new options for complete cutting of cardboard.
Thanks to the ID CUT function the work process is automatic, limiting errors and ensuring material savings.
High pressure
Increased pressure up to 550 grams for easy cutting through thick paper.
ID Cut
A professional cutting solution that digitizes cutting data (in barcode form)
User-friendly software
Supplied with a Windows driver, Simple POP and FineCut for seamless integration with Mimaki printers.
Corner Cut
This technology creates the perfect intersection of all sharp corners in a single contour, ensuring the ideal cut.
Mimaki CG-60AR
ADVANTAGES
For even more confidence, our products are GREENGUARD GOLD certified.
GREENGUARD GOLD certified products meet strict standards regarding low volatile organic compound emissions and reinforce that the product is suitable for use in places such as schools and health centers, without polluting indoor air quality.
Mimaki CG-60AR
SPECIFICATIONS
| Model | CG-60AR |
|---|---|
| Acceptable sheet size | Width: 90 ‒ 740mm Roll weight: 90 ‒ 740mm Roll diameter: 150mm or less |
| Effective cutting area | 606mm × 51m |
| Maximum speed | Axis direction: 73cm/s 45° direction: 103cm/s |
| Adjustable speed range (cutting/plotting) | 1 – 10cm/s (step 1cm/s), 10 – 70cm/s (step 5cm/s) |
| Mechanical resolution | X: 2.5μm; Y: 5μm |
| Command resolution | 25μm, 10μm (MGL-IIc), 100μm, 50μm (MGL-Ic1) |
| Repeatability | ±0.2mm/2m Excluding shrinkage/enlargement caused by film temperature |
| Accuracy Assurance Range | 586mm x 20m Depending on film type and cutting conditions |
| Maximum pressure | 550g |
| Pressure adjustment | Die-cutting: 10 – 20g (step 2g), 20 – 100g (step 5g), 100 – 550g (step 10g) Creasing: 10 – 20g (step 2g), 20 – 100g (step 5g), 100 – 150g (step 10g) Pen: 10 – 20g (step 2g), 20 – 100g (step 5g), 100 – 550g (step 10g) |
| Acceptable cutting sheet | Vinyl up to 0.25 mm thick, fluorescent foil, reflective foil, coated cardboard. |
| Applicable tools | Cutter, water-based ballpoint pen, oil-based ballpoint pen, creasing tool |
| Command type | MGL-IIc/Ic1 |
| Interface | RS-232C/USB2.0/Ethernet |
| Receive buffer size | 27Mb standard（17Mb when screening) |
| Operating environment | Temperature: 5 – 35 degrees Humidity: 35 – 75% (Rh) Non-condensing AC100V – 240V 1A 50/60Hz |
| Energy | AC100V – 240V 50/60Hz |
| Energy consumption | 140W~168W |
| Dimensions (W x D x H) | 1,030 x 287 x 335mm |
| Weight | 17kg (27kg with optional stand) |
| Support | Optional |
| Leaf basket | Optional |
MIMAKI CUTTING SOFTWARE
Simple POP
A design application that allows you to create POP and in-store decorations through templates with simple operations and then cut them on the CG-60AR.
FineCut9/Coat9
A plug-in software for advanced designers that offers complete integration with Mimaki printers and enables design and production from within Adobe® Illustrator or CorelDRAW®.
FEATURES OF THE CG-AR SERIES CUTTING PLOTTERS
The best cutting pressure in the category, up to 550 g
With a cutting pressure of up to 550 g, the CG-AR series cutting plotters have superior performance compared to the market average .
This feature allows the cutting of paper or cardboard and also makes the machine ideal for new applications such as packaging or prototyping .
The exceptional cutting speed has been improved compared to previous models, satisfying even the most demanding production demands.
The CG-AR series cutting plotters, in combination with the optional cutting table and cutting sheet , can cut and crease cards up to A3 format .
This possibility expands the range of applications even for small businesses, such as copy shops and shops, and helps to create cardboard or POS packaging .
The innovative ID-CUT is a function that allows you to recall cutting data by reading a previously printed barcode. Data transmission is one-off, dramatically reducing labor for the printing and cutting process and increasing production efficiency.
AVOID ERRORS IN POST- PRINT PROCESSES
- The ID CUT function allows the management of the cutting function of multiple jobs without operator intervention .
THE ID CUT FUNCTION MAKES PRINTING AND CUTTING EASIER
- Automatic ‘hassle-free’ cutting of multiple jobs saves time and reduces material waste .
HOW IT WORKS
- Creating data , settings and cutting conditions in Fine Cut 9
- RasterLink software, included in Mimaki plotters, prints both the code and the ID image
- The ID barcode includes cutting and rotation information
- The optical reader detects the ID barcode and cuts automatically
NORMAL CUT: carving operation that leaves the coupled liner intact.
THROUGH CUT: the coupled liner is also cut to cut out shapes of the sheet.
HALF CUT AND THROUGH CUT: combination of two cutting functions that leave small joining points for the creation of cut-out and die-cut stickers.
OVER CUT AND CORNER CUT
The Over-cut and Corner-cut functions ensure perfectly defined and cut contours without leaving cutting residues, even on thick or viscous materials , thanks to the overlap of the start and end points (Over-cut) and the abundance of cut near the corners (Corner-cut) .
CUTTING DIVISION
When the cutting data is wider than the width of the sheet, thanks to this function the work is automatically divided and panelized along the X and Y axis direction.
The offset parameter defines the distance between the tip of the blade and the center of rotation, allowing the optimization of material dragging in order to obtain the best possible cutting quality .
DRAG MOVEMENT
- The rotating blade stops cutting before reaching the corner .
- The pivoting blade is rotated , moving to the desired angle , without leaving the material .
- After completing the pirouetting motion , the corner cutting continues.
Greater flexibility in positioning cutting media thanks to new pinch roller mounting points .
Additional grit rollers provide more flexibility in media selection , broadening the range of achievable applications.
The CG – AR series cutting plotters feature continuous registration mark detection for precise contour cutting .
When multiple images are placed , this feature detects each registration mark and switches from one image to the next automatically to ensure continuous and extremely precise cutting .
An entire roll of printed material is cut and rewound without the presence of an operator , thus facilitating the production of large quantities.
The standard driver for Windows allows you to use the CG-AR series cutting plotters in the same way as standard printers for Windows Office applications .
At the press of a button you can print or cut simple templates or captions from your Office application.
Software: FineCut 9
- Powerful and easy to use plug-in cutting software
- Windows plug-ins for Adobe® Illustrator® and
CorelDRAW® - Mac plug-in for Adobe® Illustrator®
- Free package with every Mimaki cutting plotter
- Equipped with useful features such as Half – cut and crop mark detection
- The vectorization tool generates cut lines from any bitmap image
- Recording of cutting conditions ( speed , cutting pressure and offset ) for each cutting sheet
- Reorder function to minimize unnecessary movements of the cutting plotter
- Preview that allows for intuitive
Software : Simple POP
- Original Mimaki software designed specifically to simplify the creation of POP and interior decoration of points of sale .
- POP and store interior decoration projects can be easily created using the numerous templates available in Simple POP .
- Automatic cutting improves work efficiency .
- Wide variety of templates .
- POP Templates :
- POP Swing POP displays, price tags , posters, banners , etc.
- Interior decoration of the store for every season and event
- Wall stickers , window stickers , magnetic sheets , wallpapers , etc.
- Small articles :
- Labels , stamps , stickers , etc.
INKJET PRINTING and CUTTING
- Labels and stickers
- Vinyl decals
- Window decals
- Floor graphics
- Signage
- Thermo transfer
APPLICATIONS ON PAPER AND CARDBOARD
- Packaging
- Prototypes
- Working on paper
CREATION OF SIGNS
- Advertising signs
- Glass sandblasting
- Die-cut samples
- Creation of gift items
- Car stickers
- Window decorations
REFLECTIVE FILM
- Road signs
- Safety stickers
Mimaki CG-60AR
CORE TECHNOLOGY
This cutting plotter features Mimaki Core Technologies that deliver the best quality, maximum productivity and minimize risks that can delay production. See below for a list of core technologies included in the CG-AR Series.
ID Cut
ID Cut is a Mimaki solution that prints cutting data in the form of a barcode between the registration marks of the images. On the cutting plotter, the barcode and registration marks are scanned by an optical sensor and cutting starts accordingly, without the need to send the cutting data separately, reducing human intervention.
Crop Mark DetectioN
This technology looks for consecutive crop marks and realigns the media accordingly, thus achieving highly accurate cutting on each image.
Half Cut
This technology combines “die cut” and “kiss cut” into a single contour, leaving a few connection points that hold the image in place after cutting into the media roll.
Over Cut
This technology cuts a perfect intersection at the beginning and end points in a single contour, ensuring easy vinyl removal.
Corner Cut
This technology creates the perfect intersection of all sharp corners in a single contour, ensuring the ideal cut.
